Skocz do zawartości

Czy ktoś używa OLED pod RTX 3090?


Recommended Posts

Pojawia mi się problem w stylu braku obrazu po włączeniu komputera. Nie zawsze. Ale jednak. Przy starcie mam tło ładowania, komunikat o możliwości wejścia do biosu przez DEL lub F2 i kiedy powinien pojawić się ekran logowania, tv pokazuje po chwili - brak sygnału. Pomaga reset.

Firmware LG najnowsze 3.11.25. Sterownik nvidii najnowszy - 457.30. Bios Strixa zaktualizowany. Płyty głównej tak samo.


Edit:

Wydaje mi się, że na razie problem rozwiązałem, wyłączając szybki start systemu w ustawieniach zasilania.

Edytowane przez marko22
Link to post
Share on other sites

Hej,

 

Nabyłem właśnie to samo szkiełko i trafiłem na informację, że seria 30xx ma problem, który rozwiązuje najnowszy sterownik (nie ma jeszcze dla wersji europejskich).

 

https://www.tftcentral.co.uk/reviews/lg_cx_oled.htm

 


Reported Issues at 120Hz with the Latest NVIDIA RTX 30 series Graphics Cards

You may have seen some user reports that even from the latest NVIDIA RTX 3080 series cards there are a couple of problems with performance and running the screen at 120Hz.

The first is a problem displaying 4K content at 120Hz and with full RGB chroma. This seems to be an issue limited to the newest CX series and sees the screen dropping to chroma 4:2:2 when it should be able to show full range chroma within the supported bandwidth of HDMI 2.1. Note that this is one step up though from 4:2:0 that you have to live with from HDMI 2.0, but is still not living up to the full advertised potential of the screen and HDMI 2.1 capability. This leads to some loss of colour quality, particularly evident on text rendering. The CX OLED has a maximum HDMI 2.1 bandwidth throughput of 40 Gbps, not the full 48 Gbps found on their 9-series screens, but even with that smaller capability this should be sufficient to handle 4k @ 120Hz @ 10-bit @ full RGB chroma.

A second issue is that some are also reporting issues with G-sync including a complete loss of picture when attempting to use the feature at 120Hz, regardless of the colour settings or resolution. This impacted the 9-series screens from 2019 as well as the newer CX models from 2020. LG have now fixed this second issue on the 9-series, and so hopefully the CX update is not far behind.

Here’s LG’s full statement on the situation courtesy of forbes.com:

"LG has been made aware that some LG OLED TVs are experiencing certain compatibility issues with the recently launched Nvidia RTX 30 Series graphics card. An updated firmware has been in development with plans for a roll out within the next few weeks to LG's 2020 and 2019 HDMI 2.1 capable TVs, which should address these incompatibility issues. When ready, additional information will be available on the LG website and in the software update section of owners' LG TVs. We apologise for the inconvenience to our loyal customers and thank them for their support as we continue to push the boundaries of gaming technology and innovation.”

More recently the Korean LG page has seen a firmware update for the CX series that seems to have fixed the issues, confirmed by users to be working in some other regions but apparently not available yet in Europe. This is a good sign that these issues will be fixed overall pretty soon we think. We will update this accordingly when we see more although the first link above to the reddit thread tracks all the updates and news nicely.

 

 

 

Link to post
Share on other sites

Ten tekst jest z połowy października ..... ostatni firmware raczej rozwiązał ten problem, chociaż nie miałem jak tego sprawdzić, bo nie miałem karty ..... U mnie problem z obrazem jest taki, jak napisałem wyżej. Zamiast ekranu logowania, tv pokazuje brak sygnału. Ale nie za każdym razem. Na razie pomogło wyłączenie szybkiego uruchamiania. W systemie, w grach, po wyłączeniu czasowym i wznowieniu jest wszystko ok.

Edytowane przez marko22
Link to post
Share on other sites
  • 1 miesiąc temu...

Dołącz do dyskusji

Możesz dodać zawartość już teraz a zarejestrować się później. Jeśli posiadasz już konto, zaloguj się aby dodać zawartość za jego pomocą.

Gość
Odpowiedz w tym wątku...

×   Wklejono zawartość z formatowaniem.   Usuń formatowanie

  Dozwolonych jest tylko 75 emoji.

×   Odnośnik został automatycznie osadzony.   Przywróć wyświetlanie jako odnośnik

×   Przywrócono poprzednią zawartość.   Wyczyść edytor

×   Nie możesz bezpośrednio wkleić grafiki. Dodaj lub załącz grafiki z adresu URL.

  • Ostatnio przeglądający   0 użytkowników

    Brak zarejestrowanych użytkowników przeglądających tę stronę.

×
×
  • Dodaj nową pozycję...