Toshiba P300 i "Number of Mechanical Start Failures"

[Bilard 0]

Witam
 
Sprawa dotyczy nowego dysku Toshiba P300 2TB model HDWD120EZSTA. Podpięty, działa ale takie kwiatki w smartctl w ATA Device Statistics się pojawiły:
 
"Description","Value","Flags","Page, Offset"
"    Number of Mechanical Start Failures","6","---","0x03, 0x030"
 
Reszta ok, bez błędów. W internecie nie ma zbyt wiele na temat tego błędu.

Mam się czymś przejmować? Liczba nie rośnie. Od pierwszego uruchomienia tak jest.

 

Dzięki z góry za pomoc.
 
Cały log:

 

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.20.11-1-MANJARO] (local build)
Copyright © 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Toshiba P300
Device Model: TOSHIBA HDWD120
Serial Number: Z865DM2AS
LU WWN Device Id: 5 000039 fd4ecbbb9
Firmware Version: MX4OACF0
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Mar 10 07:22:26 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [sEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13674) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 228) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 100 100 054 - 0
3 Spin_Up_Time POS--- 178 178 024 - 245 (Average 180)
4 Start_Stop_Count -O--C- 100 100 000 - 19
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 020 - 0
9 Power_On_Hours -O--C- 100 100 000 - 6
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 19
192 Power-Off_Retract_Count -O--CK 100 100 000 - 19
193 Load_Cycle_Count -O--C- 100 100 000 - 19
194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 23/33)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3 -
# 2 Extended offline Aborted by host 50% 2 -
# 3 Short offline Completed without error 00% 0 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 31/32 Celsius
Lifetime Min/Max Temperature: 23/33 Celsius
Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (111)

Index Estimated Time Temperature Celsius
112 2019-03-10 05:15 32 *************
... ..( 7 skipped). .. *************
120 2019-03-10 05:23 32 *************
121 2019-03-10 05:24 33 **************
... ..( 8 skipped). .. **************
2 2019-03-10 05:33 33 **************
3 2019-03-10 05:34 ? -
4 2019-03-10 05:35 33 **************
... ..( 3 skipped). .. **************
8 2019-03-10 05:39 33 **************
9 2019-03-10 05:40 32 *************
10 2019-03-10 05:41 33 **************
... ..( 2 skipped). .. **************
13 2019-03-10 05:44 33 **************
14 2019-03-10 05:45 32 *************
15 2019-03-10 05:46 33 **************
16 2019-03-10 05:47 32 *************
17 2019-03-10 05:48 32 *************
18 2019-03-10 05:49 32 *************
19 2019-03-10 05:50 33 **************
20 2019-03-10 05:51 ? -
21 2019-03-10 05:52 33 **************
... ..( 3 skipped). .. **************
25 2019-03-10 05:56 33 **************
26 2019-03-10 05:57 32 *************
... ..( 5 skipped). .. *************
32 2019-03-10 06:03 32 *************
33 2019-03-10 06:04 31 ************
... ..( 19 skipped). .. ************
53 2019-03-10 06:24 31 ************
54 2019-03-10 06:25 30 ***********
... ..( 21 skipped). .. ***********
76 2019-03-10 06:47 30 ***********
77 2019-03-10 06:48 ? -
78 2019-03-10 06:49 25 ******
79 2019-03-10 06:50 26 *******
80 2019-03-10 06:51 26 *******
81 2019-03-10 06:52 27 ********
82 2019-03-10 06:53 27 ********
83 2019-03-10 06:54 28 *********
84 2019-03-10 06:55 28 *********
85 2019-03-10 06:56 28 *********
86 2019-03-10 06:57 29 **********
... ..( 3 skipped). .. **********
90 2019-03-10 07:01 29 **********
91 2019-03-10 07:02 30 ***********
92 2019-03-10 07:03 30 ***********
93 2019-03-10 07:04 30 ***********
94 2019-03-10 07:05 31 ************
... ..( 3 skipped). .. ************
98 2019-03-10 07:09 31 ************
99 2019-03-10 07:10 ? -
100 2019-03-10 07:11 31 ************
101 2019-03-10 07:12 31 ************
102 2019-03-10 07:13 32 *************
... ..( 4 skipped). .. *************
107 2019-03-10 07:18 32 *************
108 2019-03-10 07:19 31 ************
... ..( 2 skipped). .. ************
111 2019-03-10 07:22 31 ************

SCT Error Recovery Control:
Read: Disabled
Write: Disabled

Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 19 --- Lifetime Power-On Resets
0x01 0x010 4 6 --- Power-on Hours
0x01 0x018 6 110594523 --- Logical Sectors Written
0x01 0x020 6 955659 --- Number of Write Commands
0x01 0x028 6 113891722 --- Logical Sectors Read
0x01 0x030 6 974796 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 6 --- Spindle Motor Power-on Hours
0x03 0x010 4 6 --- Head Flying Hours
0x03 0x018 4 19 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 6 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 31 --- Current Temperature
0x05 0x010 1 - N-- Average Short Term Temperature
0x05 0x018 1 - N-- Average Long Term Temperature
0x05 0x020 1 33 --- Highest Temperature
0x05 0x028 1 23 --- Lowest Temperature
0x05 0x030 1 - N-- Highest Average Short Term Temperature
0x05 0x038 1 - N-- Lowest Average Short Term Temperature
0x05 0x040 1 - N-- Highest Average Long Term Temperature
0x05 0x048 1 - N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 61 --- Number of Hardware Resets
0x06 0x010 4 46 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS

 

[sebki1 603]

SMART wyglada w porzadku - daj jeszcze screena parametrow SMART z programu HDTune albo CrystalDiskInfo (wtedy bedzie bardziej przejrzyscie).

[Bilard 0]

 

Edytowane 10 Marca 2019 przez Bilard

[sebki1 603]

Tak jak pisalem wczesniej SMART jest czysty.Co do tego bledu w Gsmart control to z racji tego ze posiadam ten sam model dysku Toshiby 2 TB sciaglem ten program i tez mam 6 tych samych bledow.Widocznie ten model juz tak ma

[Bilard 0]

Tak jak pisalem wczesniej SMART jest czysty.Co do tego bledu w Gsmart control to z racji tego ze posiadam ten sam model dysku Toshiby 2 TB sciaglem ten program i tez mam 6 tych samych bledow.Widocznie ten model juz tak ma

Dzięki wielkie. Żyć mi to nie dawało! Nawet Winde zainstalowałem na nim by posprawdzać Temat do zamknięcia.

 

Pozdro.

 

Ps. Log ze smartcl z windowsa:

C:\Program Files\smartmontools\bin>smartctl -x sdc

smartctl 7.0 2018-12-30 r4883 [x86_64-w64-mingw32-w10-1709] (sf-7.0-1)

Copyright © 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

 

=== START OF INFORMATION SECTION ===

Model Family: Toshiba P300

Device Model: TOSHIBA HDWD120

Serial Number: Z865DM2AS

LU WWN Device Id: 5 000039 fd4ecbbb9

Firmware Version: MX4OACF0

User Capacity: 2,000,398,934,016 bytes [2.00 TB]

Sector Sizes: 512 bytes logical, 4096 bytes physical

Rotation Rate: 7200 rpm

Form Factor: 3.5 inches

Device is: In smartctl database [for details use: -P show]

ATA Version is: ATA8-ACS T13/1699-D revision 4

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is: Sun Mar 10 06:53:53 2019 CEST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

AAM feature is: Unavailable

APM feature is: Disabled

Rd look-ahead is: Enabled

Write cache is: Enabled

DSN feature is: Unavailable

ATA Security is: Disabled, frozen [sEC2]

Wt Cache Reorder: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status: (0x80) Offline data collection activity

was never started.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: (13674) seconds.

Offline data collection

capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

No Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 228) minutes.

SCT capabilities: (0x003d) SCT Status supported.

SCT Error Recovery Control supported.

SCT Feature Control supported.

SCT Data Table supported.

 

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0

2 Throughput_Performance P-S--- 100 100 054 - 0

3 Spin_Up_Time POS--- 178 178 024 - 245 (Average 180)

4 Start_Stop_Count -O--C- 100 100 000 - 19

5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0

7 Seek_Error_Rate PO-R-- 100 100 067 - 0

8 Seek_Time_Performance P-S--- 100 100 020 - 0

9 Power_On_Hours -O--C- 100 100 000 - 7

10 Spin_Retry_Count PO--C- 100 100 060 - 0

12 Power_Cycle_Count -O--CK 100 100 000 - 19

192 Power-Off_Retract_Count -O--CK 100 100 000 - 19

193 Load_Cycle_Count -O--C- 100 100 000 - 19

194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 23/33)

196 Reallocated_Event_Count -O--CK 100 100 000 - 0

197 Current_Pending_Sector -O---K 100 100 000 - 0

198 Offline_Uncorrectable ---R-- 100 100 000 - 0

199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0

||||||_ K auto-keep

|||||__ C event count

||||___ R error rate

|||____ S speed/performance

||_____ O updated online

|______ P prefailure warning

 

General Purpose Log Directory Version 1

SMART Log Directory Version 1 [multi-sector log support]

Address Access R/W Size Description

0x00 GPL,SL R/O 1 Log Directory

0x01 SL R/O 1 Summary SMART error log

0x03 GPL R/O 1 Ext. Comprehensive SMART error log

0x04 GPL R/O 7 Device Statistics log

0x06 SL R/O 1 SMART self-test log

0x07 GPL R/O 1 Extended self-test log

0x08 GPL R/O 2 Power Conditions log

0x09 SL R/W 1 Selective self-test log

0x10 GPL R/O 1 NCQ Command Error log

0x11 GPL R/O 1 SATA Phy Event Counters log

0x20 GPL R/O 1 Streaming performance log [OBS-8]

0x21 GPL R/O 1 Write stream error log

0x22 GPL R/O 1 Read stream error log

0x80-0x9f GPL,SL R/W 16 Host vendor specific log

0xe0 GPL,SL R/W 1 SCT Command/Status

0xe1 GPL,SL R/W 1 SCT Data Transfer

 

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)

No Errors Logged

 

SMART Extended Self-test Log Version: 1 (1 sectors)

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Short offline Completed without error 00% 3 -

# 2 Extended offline Aborted by host 50% 2 -

# 3 Short offline Completed without error 00% 0 -

 

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

SCT Status Version: 3

SCT Version (vendor specific): 256 (0x0100)

Device State: Active (0)

Current Temperature: 32 Celsius

Power Cycle Min/Max Temperature: 30/32 Celsius

Lifetime Min/Max Temperature: 23/33 Celsius

Under/Over Temperature Limit Count: 0/0

 

SCT Temperature History Version: 2

Temperature Sampling Period: 1 minute

Temperature Logging Interval: 1 minute

Min/Max recommended Temperature: 0/60 Celsius

Min/Max Temperature Limit: -40/70 Celsius

Temperature History Size (Index): 128 (74)

 

Index Estimated Time Temperature Celsius

75 2019-03-10 04:46 30 ***********

76 2019-03-10 04:47 30 ***********

77 2019-03-10 04:48 ? -

78 2019-03-10 04:49 25 ******

79 2019-03-10 04:50 26 *******

80 2019-03-10 04:51 26 *******

81 2019-03-10 04:52 27 ********

82 2019-03-10 04:53 27 ********

83 2019-03-10 04:54 28 *********

84 2019-03-10 04:55 28 *********

85 2019-03-10 04:56 28 *********

86 2019-03-10 04:57 29 **********

... ..( 3 skipped). .. **********

90 2019-03-10 05:01 29 **********

91 2019-03-10 05:02 30 ***********

92 2019-03-10 05:03 30 ***********

93 2019-03-10 05:04 30 ***********

94 2019-03-10 05:05 31 ************

... ..( 3 skipped). .. ************

98 2019-03-10 05:09 31 ************

99 2019-03-10 05:10 ? -

100 2019-03-10 05:11 31 ************

101 2019-03-10 05:12 31 ************

102 2019-03-10 05:13 32 *************

... ..( 4 skipped). .. *************

107 2019-03-10 05:18 32 *************

108 2019-03-10 05:19 31 ************

... ..( 14 skipped). .. ************

123 2019-03-10 05:34 31 ************

124 2019-03-10 05:35 30 ***********

... ..( 59 skipped). .. ***********

56 2019-03-10 06:35 30 ***********

57 2019-03-10 06:36 31 ************

... ..( 6 skipped). .. ************

64 2019-03-10 06:43 31 ************

65 2019-03-10 06:44 32 *************

... ..( 8 skipped). .. *************

74 2019-03-10 06:53 32 *************

 

SCT Error Recovery Control:

Read: Disabled

Write: Disabled

 

Device Statistics (GP Log 0x04)

Page Offset Size Value Flags Description

0x01 ===== = = === == General Statistics (rev 1) ==

0x01 0x008 4 19 --- Lifetime Power-On Resets

0x01 0x010 4 7 --- Power-on Hours

0x01 0x018 6 119589388 --- Logical Sectors Written

0x01 0x020 6 1107125 --- Number of Write Commands

0x01 0x028 6 129423270 --- Logical Sectors Read

0x01 0x030 6 1219952 --- Number of Read Commands

0x03 ===== = = === == Rotating Media Statistics (rev 1) ==

0x03 0x008 4 7 --- Spindle Motor Power-on Hours

0x03 0x010 4 7 --- Head Flying Hours

0x03 0x018 4 19 --- Head Load Events

0x03 0x020 4 0 --- Number of Reallocated Logical Sectors

0x03 0x028 4 0 --- Read Recovery Attempts

0x03 0x030 4 6 --- Number of Mechanical Start Failures

0x04 ===== = = === == General Errors Statistics (rev 1) ==

0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors

0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion

0x05 ===== = = === == Temperature Statistics (rev 1) ==

0x05 0x008 1 32 --- Current Temperature

0x05 0x010 1 - N-- Average Short Term Temperature

0x05 0x018 1 - N-- Average Long Term Temperature

0x05 0x020 1 33 --- Highest Temperature

0x05 0x028 1 23 --- Lowest Temperature

0x05 0x030 1 - N-- Highest Average Short Term Temperature

0x05 0x038 1 - N-- Lowest Average Short Term Temperature

0x05 0x040 1 - N-- Highest Average Long Term Temperature

0x05 0x048 1 - N-- Lowest Average Long Term Temperature

0x05 0x050 4 0 --- Time in Over-Temperature

0x05 0x058 1 60 --- Specified Maximum Operating Temperature

0x05 0x060 4 0 --- Time in Under-Temperature

0x05 0x068 1 0 --- Specified Minimum Operating Temperature

0x06 ===== = = === == Transport Statistics (rev 1) ==

0x06 0x008 4 68 --- Number of Hardware Resets

0x06 0x010 4 51 --- Number of ASR Events

0x06 0x018 4 0 --- Number of Interface CRC Errors

|||_ C monitored condition met

||__ D supports DSN

|___ N normalized value

 

Pending Defects log (GP Log 0x0c) not supported

 

SATA Phy Event Counters (GP Log 0x11)

ID Size Value Description

0x0001 2 0 Command failed due to ICRC error

0x0002 2 0 R_ERR response for data FIS

0x0003 2 0 R_ERR response for device-to-host data FIS

0x0004 2 0 R_ERR response for host-to-device data FIS

0x0005 2 0 R_ERR response for non-data FIS

0x0006 2 0 R_ERR response for device-to-host non-data FIS

0x0007 2 0 R_ERR response for host-to-device non-data FIS

0x0009 2 61 Transition from drive PhyRdy to drive PhyNRdy

0x000a 2 12 Device-to-host register FISes sent due to a COMRESET

0x000b 2 0 CRC errors within host-to-device FIS

0x000d 2 0 Non-CRC errors within host-to-device FIS